| 1 |
# |
| 2 |
# SOTIRED -- So Tired kernel configuration file for FreeBSD/i386 |
| 3 |
# |
| 4 |
# For more information on this file, please read the config(5) manual page, |
| 5 |
# and/or the handbook section on Kernel Configuration Files: |
| 6 |
# |
| 7 |
# http://www.FreeBSD.org/doc/en_US.ISO8859-1/books/handbook/kernelconfig-config.html |
| 8 |
# |
| 9 |
# The handbook is also available locally in /usr/share/doc/handbook |
| 10 |
# if you've installed the doc distribution, otherwise always see the |
| 11 |
# FreeBSD World Wide Web server (http://www.FreeBSD.org/) for the |
| 12 |
# latest information. |
| 13 |
# |
| 14 |
# An exhaustive list of options and more detailed explanations of the |
| 15 |
# device lines is also present in the ../../conf/NOTES and NOTES files. |
| 16 |
# If you are in doubt as to the purpose or necessity of a line, check first |
| 17 |
# in NOTES. |
| 18 |
# |
| 19 |
# $FreeBSD: src/sys/i386/conf/GENERIC,v 1.519.2.4.2.2 2009/11/09 23:48:01 kensmith Exp $ |
| 20 |
|
| 21 |
#cpu I486_CPU |
| 22 |
cpu I586_CPU |
| 23 |
#cpu I686_CPU |
| 24 |
ident SOTIRED |
| 25 |
|
| 26 |
# To statically compile in device wiring instead of /boot/device.hints |
| 27 |
#hints "GENERIC.hints" # Default places to look for devices. |
| 28 |
|
| 29 |
# Use the following to compile in values accessible to the kernel |
| 30 |
# through getenv() (or kenv(1) in userland). The format of the file |
| 31 |
# is 'variable=value', see kenv(1) |
| 32 |
# |
| 33 |
# env "GENERIC.env" |
| 34 |
|
| 35 |
makeoptions DEBUG=-g # Build kernel with gdb(1) debug symbols |
| 36 |
|
| 37 |
options SCHED_ULE # ULE scheduler |
| 38 |
options PREEMPTION # Enable kernel thread preemption |
| 39 |
options INET # InterNETworking |
| 40 |
options INET6 # IPv6 communications protocols |
| 41 |
options SCTP # Stream Control Transmission Protocol |
| 42 |
options FFS # Berkeley Fast Filesystem |
| 43 |
options SOFTUPDATES # Enable FFS soft updates support |
| 44 |
options UFS_ACL # Support for access control lists |
| 45 |
options UFS_DIRHASH # Improve performance on big directories |
| 46 |
options UFS_GJOURNAL # Enable gjournal-based UFS journaling |
| 47 |
#options MD_ROOT # MD is a potential root device |
| 48 |
options NFSCLIENT # Network Filesystem Client |
| 49 |
options NFSSERVER # Network Filesystem Server |
| 50 |
options NFSLOCKD # Network Lock Manager |
| 51 |
#options NFS_ROOT # NFS usable as /, requires NFSCLIENT |
| 52 |
#options MSDOSFS # MSDOS Filesystem |
| 53 |
#options CD9660 # ISO 9660 Filesystem |
| 54 |
options PROCFS # Process filesystem (requires PSEUDOFS) |
| 55 |
options PSEUDOFS # Pseudo-filesystem framework |
| 56 |
options GEOM_PART_GPT # GUID Partition Tables. |
| 57 |
options GEOM_LABEL # Provides labelization |
| 58 |
options COMPAT_43TTY # BSD 4.3 TTY compat (sgtty) |
| 59 |
options COMPAT_FREEBSD4 # Compatible with FreeBSD4 |
| 60 |
options COMPAT_FREEBSD5 # Compatible with FreeBSD5 |
| 61 |
options COMPAT_FREEBSD6 # Compatible with FreeBSD6 |
| 62 |
options COMPAT_FREEBSD7 # Compatible with FreeBSD7 |
| 63 |
options SCSI_DELAY=5000 # Delay (in ms) before probing SCSI |
| 64 |
options KTRACE # ktrace(1) support |
| 65 |
options STACK # stack(9) support |
| 66 |
options SYSVSHM # SYSV-style shared memory |
| 67 |
options SYSVMSG # SYSV-style message queues |
| 68 |
options SYSVSEM # SYSV-style semaphores |
| 69 |
options P1003_1B_SEMAPHORES # POSIX-style semaphores |
| 70 |
options _KPOSIX_PRIORITY_SCHEDULING # POSIX P1003_1B real-time extensions |
| 71 |
options PRINTF_BUFR_SIZE=128 # Prevent printf output being interspersed. |
| 72 |
options KBD_INSTALL_CDEV # install a CDEV entry in /dev |
| 73 |
options HWPMC_HOOKS # Necessary kernel hooks for hwpmc(4) |
| 74 |
options AUDIT # Security event auditing |
| 75 |
options MAC # TrustedBSD MAC Framework |
| 76 |
options FLOWTABLE # per-cpu routing cache |
| 77 |
#options KDTRACE_HOOKS # Kernel DTrace hooks |
| 78 |
|
| 79 |
# To make an SMP kernel, the next two lines are needed |
| 80 |
#options SMP # Symmetric MultiProcessor Kernel |
| 81 |
#device apic # I/O APIC |
| 82 |
|
| 83 |
# CPU frequency control |
| 84 |
device cpufreq |
| 85 |
|
| 86 |
# Bus support. |
| 87 |
device acpi |
| 88 |
#device eisa |
| 89 |
device pci |
| 90 |
|
| 91 |
# Floppy drives |
| 92 |
#device fdc |
| 93 |
|
| 94 |
# ATA and ATAPI devices |
| 95 |
device ata |
| 96 |
device atadisk # ATA disk drives |
| 97 |
#device ataraid # ATA RAID drives |
| 98 |
#device atapicd # ATAPI CDROM drives |
| 99 |
#device atapifd # ATAPI floppy drives |
| 100 |
#device atapist # ATAPI tape drives |
| 101 |
options ATA_STATIC_ID # Static device numbering |
| 102 |
|
| 103 |
# SCSI Controllers |
| 104 |
#device ahb # EISA AHA1742 family |
| 105 |
#device ahc # AHA2940 and onboard AIC7xxx devices |
| 106 |
#options AHC_REG_PRETTY_PRINT # Print register bitfields in debug |
| 107 |
# output. Adds ~128k to driver. |
| 108 |
#device ahd # AHA39320/29320 and onboard AIC79xx devices |
| 109 |
#options AHD_REG_PRETTY_PRINT # Print register bitfields in debug |
| 110 |
# output. Adds ~215k to driver. |
| 111 |
#device amd # AMD 53C974 (Tekram DC-390(T)) |
| 112 |
#device hptiop # Highpoint RocketRaid 3xxx series |
| 113 |
#device isp # Qlogic family |
| 114 |
#device ispfw # Firmware for QLogic HBAs- normally a module |
| 115 |
#device mpt # LSI-Logic MPT-Fusion |
| 116 |
#device ncr # NCR/Symbios Logic |
| 117 |
#device sym # NCR/Symbios Logic (newer chipsets + those of `ncr') |
| 118 |
#device trm # Tekram DC395U/UW/F DC315U adapters |
| 119 |
|
| 120 |
#device adv # Advansys SCSI adapters |
| 121 |
#device adw # Advansys wide SCSI adapters |
| 122 |
#device aha # Adaptec 154x SCSI adapters |
| 123 |
#device aic # Adaptec 15[012]x SCSI adapters, AIC-6[23]60. |
| 124 |
#device bt # Buslogic/Mylex MultiMaster SCSI adapters |
| 125 |
|
| 126 |
#device ncv # NCR 53C500 |
| 127 |
#device nsp # Workbit Ninja SCSI-3 |
| 128 |
#device stg # TMC 18C30/18C50 |
| 129 |
|
| 130 |
# SCSI peripherals |
| 131 |
device scbus # SCSI bus (required for SCSI) |
| 132 |
#device ch # SCSI media changers |
| 133 |
device da # Direct Access (disks) |
| 134 |
#device sa # Sequential Access (tape etc) |
| 135 |
#device cd # CD |
| 136 |
device pass # Passthrough device (direct SCSI access) |
| 137 |
device ses # SCSI Environmental Services (and SAF-TE) |
| 138 |
|
| 139 |
# RAID controllers interfaced to the SCSI subsystem |
| 140 |
#device amr # AMI MegaRAID |
| 141 |
#device arcmsr # Areca SATA II RAID |
| 142 |
#device asr # DPT SmartRAID V, VI and Adaptec SCSI RAID |
| 143 |
#device ciss # Compaq Smart RAID 5* |
| 144 |
#device dpt # DPT Smartcache III, IV - See NOTES for options |
| 145 |
#device hptmv # Highpoint RocketRAID 182x |
| 146 |
#device hptrr # Highpoint RocketRAID 17xx, 22xx, 23xx, 25xx |
| 147 |
#device iir # Intel Integrated RAID |
| 148 |
#device ips # IBM (Adaptec) ServeRAID |
| 149 |
#device mly # Mylex AcceleRAID/eXtremeRAID |
| 150 |
#device twa # 3ware 9000 series PATA/SATA RAID |
| 151 |
|
| 152 |
# RAID controllers |
| 153 |
#device aac # Adaptec FSA RAID |
| 154 |
#device aacp # SCSI passthrough for aac (requires CAM) |
| 155 |
#device ida # Compaq Smart RAID |
| 156 |
#device mfi # LSI MegaRAID SAS |
| 157 |
#device mlx # Mylex DAC960 family |
| 158 |
#device pst # Promise Supertrak SX6000 |
| 159 |
#device twe # 3ware ATA RAID |
| 160 |
|
| 161 |
# atkbdc0 controls both the keyboard and the PS/2 mouse |
| 162 |
#device atkbdc # AT keyboard controller |
| 163 |
#device atkbd # AT keyboard |
| 164 |
#device psm # PS/2 mouse |
| 165 |
|
| 166 |
#device kbdmux # keyboard multiplexer |
| 167 |
|
| 168 |
#device vga # VGA video card driver |
| 169 |
|
| 170 |
#device splash # Splash screen and screen saver support |
| 171 |
|
| 172 |
# syscons is the default console driver, resembling an SCO console |
| 173 |
#device sc |
| 174 |
|
| 175 |
device agp # support several AGP chipsets |
| 176 |
|
| 177 |
# Power management support (see NOTES for more options) |
| 178 |
#device apm |
| 179 |
# Add suspend/resume support for the i8254. |
| 180 |
device pmtimer |
| 181 |
|
| 182 |
# PCCARD (PCMCIA) support |
| 183 |
# PCMCIA and cardbus bridge support |
| 184 |
#device cbb # cardbus (yenta) bridge |
| 185 |
#device pccard # PC Card (16-bit) bus |
| 186 |
#device cardbus # CardBus (32-bit) bus |
| 187 |
|
| 188 |
# Serial (COM) ports |
| 189 |
device uart # Generic UART driver |
| 190 |
|
| 191 |
# Parallel port |
| 192 |
#device ppc |
| 193 |
#device ppbus # Parallel port bus (required) |
| 194 |
#device lpt # Printer |
| 195 |
#device plip # TCP/IP over parallel |
| 196 |
#device ppi # Parallel port interface device |
| 197 |
#device vpo # Requires scbus and da |
| 198 |
|
| 199 |
# If you've got a "dumb" serial or parallel PCI card that is |
| 200 |
# supported by the puc(4) glue driver, uncomment the following |
| 201 |
# line to enable it (connects to sio, uart and/or ppc drivers): |
| 202 |
#device puc |
| 203 |
|
| 204 |
# PCI Ethernet NICs. |
| 205 |
#device de # DEC/Intel DC21x4x (``Tulip'') |
| 206 |
#device em # Intel PRO/1000 Gigabit Ethernet Family |
| 207 |
#device igb # Intel PRO/1000 PCIE Server Gigabit Family |
| 208 |
#device ixgb # Intel PRO/10GbE Ethernet Card |
| 209 |
#device le # AMD Am7900 LANCE and Am79C9xx PCnet |
| 210 |
#device ti # Alteon Networks Tigon I/II gigabit Ethernet |
| 211 |
#device txp # 3Com 3cR990 (``Typhoon'') |
| 212 |
#device vx # 3Com 3c590, 3c595 (``Vortex'') |
| 213 |
|
| 214 |
# PCI Ethernet NICs that use the common MII bus controller code. |
| 215 |
# NOTE: Be sure to keep the 'device miibus' line in order to use these NICs! |
| 216 |
device miibus # MII bus support |
| 217 |
#device ae # Attansic/Atheros L2 FastEthernet |
| 218 |
#device age # Attansic/Atheros L1 Gigabit Ethernet |
| 219 |
#device alc # Atheros AR8131/AR8132 Ethernet |
| 220 |
#device ale # Atheros AR8121/AR8113/AR8114 Ethernet |
| 221 |
#device bce # Broadcom BCM5706/BCM5708 Gigabit Ethernet |
| 222 |
#device bfe # Broadcom BCM440x 10/100 Ethernet |
| 223 |
#device bge # Broadcom BCM570xx Gigabit Ethernet |
| 224 |
#device dc # DEC/Intel 21143 and various workalikes |
| 225 |
#device et # Agere ET1310 10/100/Gigabit Ethernet |
| 226 |
#device fxp # Intel EtherExpress PRO/100B (82557, 82558) |
| 227 |
#device jme # JMicron JMC250 Gigabit/JMC260 Fast Ethernet |
| 228 |
#device lge # Level 1 LXT1001 gigabit Ethernet |
| 229 |
#device msk # Marvell/SysKonnect Yukon II Gigabit Ethernet |
| 230 |
#device nfe # nVidia nForce MCP on-board Ethernet |
| 231 |
#device nge # NatSemi DP83820 gigabit Ethernet |
| 232 |
#device nve # nVidia nForce MCP on-board Ethernet Networking |
| 233 |
#device pcn # AMD Am79C97x PCI 10/100 (precedence over 'le') |
| 234 |
#device re # RealTek 8139C+/8169/8169S/8110S |
| 235 |
#device rl # RealTek 8129/8139 |
| 236 |
#device sf # Adaptec AIC-6915 (``Starfire'') |
| 237 |
#device sis # Silicon Integrated Systems SiS 900/SiS 7016 |
| 238 |
#device sk # SysKonnect SK-984x & SK-982x gigabit Ethernet |
| 239 |
#device ste # Sundance ST201 (D-Link DFE-550TX) |
| 240 |
#device stge # Sundance/Tamarack TC9021 gigabit Ethernet |
| 241 |
#device tl # Texas Instruments ThunderLAN |
| 242 |
#device tx # SMC EtherPower II (83c170 ``EPIC'') |
| 243 |
#device vge # VIA VT612x gigabit Ethernet |
| 244 |
device vr # VIA Rhine, Rhine II |
| 245 |
#device wb # Winbond W89C840F |
| 246 |
#device xl # 3Com 3c90x (``Boomerang'', ``Cyclone'') |
| 247 |
|
| 248 |
# ISA Ethernet NICs. pccard NICs included. |
| 249 |
#device cs # Crystal Semiconductor CS89x0 NIC |
| 250 |
# 'device ed' requires 'device miibus' |
| 251 |
#device ed # NE[12]000, SMC Ultra, 3c503, DS8390 cards |
| 252 |
#device ex # Intel EtherExpress Pro/10 and Pro/10+ |
| 253 |
#device ep # Etherlink III based cards |
| 254 |
#device fe # Fujitsu MB8696x based cards |
| 255 |
#device ie # EtherExpress 8/16, 3C507, StarLAN 10 etc. |
| 256 |
#device sn # SMC's 9000 series of Ethernet chips |
| 257 |
#device xe # Xircom pccard Ethernet |
| 258 |
|
| 259 |
# Wireless NIC cards |
| 260 |
#device wlan # 802.11 support |
| 261 |
#options IEEE80211_DEBUG # enable debug msgs |
| 262 |
#options IEEE80211_AMPDU_AGE # age frames in AMPDU reorder q's |
| 263 |
#options IEEE80211_SUPPORT_MESH # enable 802.11s draft support |
| 264 |
#device wlan_wep # 802.11 WEP support |
| 265 |
#device wlan_ccmp # 802.11 CCMP support |
| 266 |
#device wlan_tkip # 802.11 TKIP support |
| 267 |
#device wlan_amrr # AMRR transmit rate control algorithm |
| 268 |
#device an # Aironet 4500/4800 802.11 wireless NICs. |
| 269 |
#device ath # Atheros pci/cardbus NIC's |
| 270 |
#device ath_hal # pci/cardbus chip support |
| 271 |
#options AH_SUPPORT_AR5416 # enable AR5416 tx/rx descriptors |
| 272 |
#device ath_rate_sample # SampleRate tx rate control for ath |
| 273 |
#device ral # Ralink Technology RT2500 wireless NICs. |
| 274 |
#device wi # WaveLAN/Intersil/Symbol 802.11 wireless NICs. |
| 275 |
#device wl # Older non 802.11 Wavelan wireless NIC. |
| 276 |
|
| 277 |
# Pseudo devices. |
| 278 |
device loop # Network loopback |
| 279 |
device random # Entropy device |
| 280 |
device ether # Ethernet support |
| 281 |
device tun # Packet tunnel. |
| 282 |
device pty # BSD-style compatibility pseudo ttys |
| 283 |
device md # Memory "disks" |
| 284 |
device gif # IPv6 and IPv4 tunneling |
| 285 |
device faith # IPv6-to-IPv4 relaying (translation) |
| 286 |
device firmware # firmware assist module |
| 287 |
|
| 288 |
# The `bpf' device enables the Berkeley Packet Filter. |
| 289 |
# Be aware of the administrative consequences of enabling this! |
| 290 |
# Note that 'bpf' is required for DHCP. |
| 291 |
device bpf # Berkeley packet filter |
| 292 |
|
| 293 |
# USB support |
| 294 |
#device uhci # UHCI PCI->USB interface |
| 295 |
device ohci # OHCI PCI->USB interface |
| 296 |
device ehci # EHCI PCI->USB interface (USB 2.0) |
| 297 |
device usb # USB Bus (required) |
| 298 |
#device udbp # USB Double Bulk Pipe devices |
| 299 |
#device uhid # "Human Interface Devices" |
| 300 |
#device ukbd # Keyboard |
| 301 |
#device ulpt # Printer |
| 302 |
device umass # Disks/Mass storage - Requires scbus and da |
| 303 |
#device ums # Mouse |
| 304 |
#device rum # Ralink Technology RT2501USB wireless NICs |
| 305 |
#device ural # Ralink Technology RT2500USB wireless NICs |
| 306 |
#device uath # Atheros AR5523 wireless NICs |
| 307 |
#device zyd # ZyDAS zb1211/zb1211b wireless NICs |
| 308 |
#device urio # Diamond Rio 500 MP3 player |
| 309 |
# USB Serial devices |
| 310 |
#device u3g # USB-based 3G modems (Option, Huawei, Sierra) |
| 311 |
#device uark # Technologies ARK3116 based serial adapters |
| 312 |
#device ubsa # Belkin F5U103 and compatible serial adapters |
| 313 |
#device uftdi # For FTDI usb serial adapters |
| 314 |
#device uipaq # Some WinCE based devices |
| 315 |
#device uplcom # Prolific PL-2303 serial adapters |
| 316 |
#device uslcom # SI Labs CP2101/CP2102 serial adapters |
| 317 |
#device uvisor # Visor and Palm devices |
| 318 |
#device uvscom # USB serial support for DDI pocket's PHS |
| 319 |
# USB Ethernet, requires miibus |
| 320 |
#device aue # ADMtek USB Ethernet |
| 321 |
#device axe # ASIX Electronics USB Ethernet |
| 322 |
#device cdce # Generic USB over Ethernet |
| 323 |
#device cue # CATC USB Ethernet |
| 324 |
#device kue # Kawasaki LSI USB Ethernet |
| 325 |
#device rue # RealTek RTL8150 USB Ethernet |
| 326 |
#device udav # Davicom DM9601E USB |
| 327 |
|
| 328 |
# FireWire support |
| 329 |
#device firewire # FireWire bus code |
| 330 |
#device sbp # SCSI over FireWire (Requires scbus and da) |
| 331 |
#device fwe # Ethernet over FireWire (non-standard!) |
| 332 |
#device fwip # IP over FireWire (RFC 2734,3146) |
| 333 |
#device dcons # Dumb console driver |
| 334 |
#device dcons_crom # Configuration ROM for dcons |
| 335 |
|
| 336 |
# IPSec - 2008-04-30 Douglas Thrift |
| 337 |
device crypto # core crypto support |
| 338 |
device cryptodev # /dev/crypto for access to h/w |
| 339 |
|
| 340 |
options IPSEC #IP security |
| 341 |
|
| 342 |
# Soekris - 2008-01-06 Douglas Thrift |
| 343 |
options CPU_GEODE |
| 344 |
options CPU_SOEKRIS |
| 345 |
|
| 346 |
# vim: tabstop=8 shiftwidth=8 |
