1 |
# |
2 |
# SOTIRED -- So Tired kernel configuration file for FreeBSD/i386 |
3 |
# |
4 |
# For more information on this file, please read the config(5) manual page, |
5 |
# and/or the handbook section on Kernel Configuration Files: |
6 |
# |
7 |
# http://www.FreeBSD.org/doc/en_US.ISO8859-1/books/handbook/kernelconfig-config.html |
8 |
# |
9 |
# The handbook is also available locally in /usr/share/doc/handbook |
10 |
# if you've installed the doc distribution, otherwise always see the |
11 |
# FreeBSD World Wide Web server (http://www.FreeBSD.org/) for the |
12 |
# latest information. |
13 |
# |
14 |
# An exhaustive list of options and more detailed explanations of the |
15 |
# device lines is also present in the ../../conf/NOTES and NOTES files. |
16 |
# If you are in doubt as to the purpose or necessity of a line, check first |
17 |
# in NOTES. |
18 |
# |
19 |
# $FreeBSD: src/sys/i386/conf/GENERIC,v 1.519.2.10.2.1 2010/06/14 02:09:06 kensmith Exp $ |
20 |
|
21 |
#cpu I486_CPU |
22 |
cpu I586_CPU |
23 |
#cpu I686_CPU |
24 |
ident SOTIRED |
25 |
|
26 |
# To statically compile in device wiring instead of /boot/device.hints |
27 |
#hints "GENERIC.hints" # Default places to look for devices. |
28 |
|
29 |
# Use the following to compile in values accessible to the kernel |
30 |
# through getenv() (or kenv(1) in userland). The format of the file |
31 |
# is 'variable=value', see kenv(1) |
32 |
# |
33 |
# env "GENERIC.env" |
34 |
|
35 |
makeoptions DEBUG=-g # Build kernel with gdb(1) debug symbols |
36 |
|
37 |
options SCHED_ULE # ULE scheduler |
38 |
options PREEMPTION # Enable kernel thread preemption |
39 |
options INET # InterNETworking |
40 |
options INET6 # IPv6 communications protocols |
41 |
options SCTP # Stream Control Transmission Protocol |
42 |
options FFS # Berkeley Fast Filesystem |
43 |
options SOFTUPDATES # Enable FFS soft updates support |
44 |
options UFS_ACL # Support for access control lists |
45 |
options UFS_DIRHASH # Improve performance on big directories |
46 |
options UFS_GJOURNAL # Enable gjournal-based UFS journaling |
47 |
#options MD_ROOT # MD is a potential root device |
48 |
options NFSCLIENT # Network Filesystem Client |
49 |
options NFSSERVER # Network Filesystem Server |
50 |
options NFSLOCKD # Network Lock Manager |
51 |
#options NFS_ROOT # NFS usable as /, requires NFSCLIENT |
52 |
#options MSDOSFS # MSDOS Filesystem |
53 |
#options CD9660 # ISO 9660 Filesystem |
54 |
options PROCFS # Process filesystem (requires PSEUDOFS) |
55 |
options PSEUDOFS # Pseudo-filesystem framework |
56 |
options GEOM_PART_GPT # GUID Partition Tables. |
57 |
options GEOM_LABEL # Provides labelization |
58 |
options COMPAT_43TTY # BSD 4.3 TTY compat (sgtty) |
59 |
options COMPAT_FREEBSD4 # Compatible with FreeBSD4 |
60 |
options COMPAT_FREEBSD5 # Compatible with FreeBSD5 |
61 |
options COMPAT_FREEBSD6 # Compatible with FreeBSD6 |
62 |
options COMPAT_FREEBSD7 # Compatible with FreeBSD7 |
63 |
options SCSI_DELAY=5000 # Delay (in ms) before probing SCSI |
64 |
options KTRACE # ktrace(1) support |
65 |
options STACK # stack(9) support |
66 |
options SYSVSHM # SYSV-style shared memory |
67 |
options SYSVMSG # SYSV-style message queues |
68 |
options SYSVSEM # SYSV-style semaphores |
69 |
options P1003_1B_SEMAPHORES # POSIX-style semaphores |
70 |
options _KPOSIX_PRIORITY_SCHEDULING # POSIX P1003_1B real-time extensions |
71 |
options PRINTF_BUFR_SIZE=128 # Prevent printf output being interspersed. |
72 |
options KBD_INSTALL_CDEV # install a CDEV entry in /dev |
73 |
options HWPMC_HOOKS # Necessary kernel hooks for hwpmc(4) |
74 |
options AUDIT # Security event auditing |
75 |
options MAC # TrustedBSD MAC Framework |
76 |
options FLOWTABLE # per-cpu routing cache |
77 |
#options KDTRACE_HOOKS # Kernel DTrace hooks |
78 |
options INCLUDE_CONFIG_FILE # Include this file in kernel |
79 |
|
80 |
# To make an SMP kernel, the next two lines are needed |
81 |
#options SMP # Symmetric MultiProcessor Kernel |
82 |
#device apic # I/O APIC |
83 |
|
84 |
# CPU frequency control |
85 |
device cpufreq |
86 |
|
87 |
# Bus support. |
88 |
#device acpi |
89 |
#device eisa |
90 |
device pci |
91 |
|
92 |
# Floppy drives |
93 |
#device fdc |
94 |
|
95 |
# ATA and ATAPI devices |
96 |
device ata |
97 |
device atadisk # ATA disk drives |
98 |
#device ataraid # ATA RAID drives |
99 |
#device atapicd # ATAPI CDROM drives |
100 |
#device atapifd # ATAPI floppy drives |
101 |
#device atapist # ATAPI tape drives |
102 |
options ATA_STATIC_ID # Static device numbering |
103 |
|
104 |
# SCSI Controllers |
105 |
#device ahb # EISA AHA1742 family |
106 |
#device ahc # AHA2940 and onboard AIC7xxx devices |
107 |
#options AHC_REG_PRETTY_PRINT # Print register bitfields in debug |
108 |
# output. Adds ~128k to driver. |
109 |
#device ahd # AHA39320/29320 and onboard AIC79xx devices |
110 |
#options AHD_REG_PRETTY_PRINT # Print register bitfields in debug |
111 |
# output. Adds ~215k to driver. |
112 |
#device amd # AMD 53C974 (Tekram DC-390(T)) |
113 |
#device hptiop # Highpoint RocketRaid 3xxx series |
114 |
#device isp # Qlogic family |
115 |
#device ispfw # Firmware for QLogic HBAs- normally a module |
116 |
#device mpt # LSI-Logic MPT-Fusion |
117 |
#device ncr # NCR/Symbios Logic |
118 |
#device sym # NCR/Symbios Logic (newer chipsets + those of `ncr') |
119 |
#device trm # Tekram DC395U/UW/F DC315U adapters |
120 |
|
121 |
#device adv # Advansys SCSI adapters |
122 |
#device adw # Advansys wide SCSI adapters |
123 |
#device aha # Adaptec 154x SCSI adapters |
124 |
#device aic # Adaptec 15[012]x SCSI adapters, AIC-6[23]60. |
125 |
#device bt # Buslogic/Mylex MultiMaster SCSI adapters |
126 |
|
127 |
#device ncv # NCR 53C500 |
128 |
#device nsp # Workbit Ninja SCSI-3 |
129 |
#device stg # TMC 18C30/18C50 |
130 |
|
131 |
# SCSI peripherals |
132 |
device scbus # SCSI bus (required for SCSI) |
133 |
#device ch # SCSI media changers |
134 |
device da # Direct Access (disks) |
135 |
#device sa # Sequential Access (tape etc) |
136 |
#device cd # CD |
137 |
device pass # Passthrough device (direct SCSI access) |
138 |
device ses # SCSI Environmental Services (and SAF-TE) |
139 |
|
140 |
# RAID controllers interfaced to the SCSI subsystem |
141 |
#device amr # AMI MegaRAID |
142 |
#device arcmsr # Areca SATA II RAID |
143 |
#device asr # DPT SmartRAID V, VI and Adaptec SCSI RAID |
144 |
#device ciss # Compaq Smart RAID 5* |
145 |
#device dpt # DPT Smartcache III, IV - See NOTES for options |
146 |
#device hptmv # Highpoint RocketRAID 182x |
147 |
#device hptrr # Highpoint RocketRAID 17xx, 22xx, 23xx, 25xx |
148 |
#device iir # Intel Integrated RAID |
149 |
#device ips # IBM (Adaptec) ServeRAID |
150 |
#device mly # Mylex AcceleRAID/eXtremeRAID |
151 |
#device twa # 3ware 9000 series PATA/SATA RAID |
152 |
|
153 |
# RAID controllers |
154 |
#device aac # Adaptec FSA RAID |
155 |
#device aacp # SCSI passthrough for aac (requires CAM) |
156 |
#device ida # Compaq Smart RAID |
157 |
#device mfi # LSI MegaRAID SAS |
158 |
#device mlx # Mylex DAC960 family |
159 |
#device pst # Promise Supertrak SX6000 |
160 |
#device twe # 3ware ATA RAID |
161 |
|
162 |
# atkbdc0 controls both the keyboard and the PS/2 mouse |
163 |
#device atkbdc # AT keyboard controller |
164 |
#device atkbd # AT keyboard |
165 |
#device psm # PS/2 mouse |
166 |
|
167 |
#device kbdmux # keyboard multiplexer |
168 |
|
169 |
#device vga # VGA video card driver |
170 |
|
171 |
#device splash # Splash screen and screen saver support |
172 |
|
173 |
# syscons is the default console driver, resembling an SCO console |
174 |
#device sc |
175 |
|
176 |
device agp # support several AGP chipsets |
177 |
|
178 |
# Power management support (see NOTES for more options) |
179 |
#device apm |
180 |
# Add suspend/resume support for the i8254. |
181 |
device pmtimer |
182 |
|
183 |
# PCCARD (PCMCIA) support |
184 |
# PCMCIA and cardbus bridge support |
185 |
#device cbb # cardbus (yenta) bridge |
186 |
#device pccard # PC Card (16-bit) bus |
187 |
#device cardbus # CardBus (32-bit) bus |
188 |
|
189 |
# Serial (COM) ports |
190 |
device uart # Generic UART driver |
191 |
|
192 |
# Parallel port |
193 |
#device ppc |
194 |
#device ppbus # Parallel port bus (required) |
195 |
#device lpt # Printer |
196 |
#device plip # TCP/IP over parallel |
197 |
#device ppi # Parallel port interface device |
198 |
#device vpo # Requires scbus and da |
199 |
|
200 |
# If you've got a "dumb" serial or parallel PCI card that is |
201 |
# supported by the puc(4) glue driver, uncomment the following |
202 |
# line to enable it (connects to sio, uart and/or ppc drivers): |
203 |
#device puc |
204 |
|
205 |
# PCI Ethernet NICs. |
206 |
#device de # DEC/Intel DC21x4x (``Tulip'') |
207 |
#device em # Intel PRO/1000 Gigabit Ethernet Family |
208 |
#device igb # Intel PRO/1000 PCIE Server Gigabit Family |
209 |
#device ixgb # Intel PRO/10GbE Ethernet Card |
210 |
#device le # AMD Am7900 LANCE and Am79C9xx PCnet |
211 |
#device ti # Alteon Networks Tigon I/II gigabit Ethernet |
212 |
#device txp # 3Com 3cR990 (``Typhoon'') |
213 |
#device vx # 3Com 3c590, 3c595 (``Vortex'') |
214 |
|
215 |
# PCI Ethernet NICs that use the common MII bus controller code. |
216 |
# NOTE: Be sure to keep the 'device miibus' line in order to use these NICs! |
217 |
device miibus # MII bus support |
218 |
#device ae # Attansic/Atheros L2 FastEthernet |
219 |
#device age # Attansic/Atheros L1 Gigabit Ethernet |
220 |
#device alc # Atheros AR8131/AR8132 Ethernet |
221 |
#device ale # Atheros AR8121/AR8113/AR8114 Ethernet |
222 |
#device bce # Broadcom BCM5706/BCM5708 Gigabit Ethernet |
223 |
#device bfe # Broadcom BCM440x 10/100 Ethernet |
224 |
#device bge # Broadcom BCM570xx Gigabit Ethernet |
225 |
#device dc # DEC/Intel 21143 and various workalikes |
226 |
#device et # Agere ET1310 10/100/Gigabit Ethernet |
227 |
#device fxp # Intel EtherExpress PRO/100B (82557, 82558) |
228 |
#device jme # JMicron JMC250 Gigabit/JMC260 Fast Ethernet |
229 |
#device lge # Level 1 LXT1001 gigabit Ethernet |
230 |
#device msk # Marvell/SysKonnect Yukon II Gigabit Ethernet |
231 |
#device nfe # nVidia nForce MCP on-board Ethernet |
232 |
#device nge # NatSemi DP83820 gigabit Ethernet |
233 |
#device nve # nVidia nForce MCP on-board Ethernet Networking |
234 |
#device pcn # AMD Am79C97x PCI 10/100 (precedence over 'le') |
235 |
#device re # RealTek 8139C+/8169/8169S/8110S |
236 |
#device rl # RealTek 8129/8139 |
237 |
#device sf # Adaptec AIC-6915 (``Starfire'') |
238 |
#device sge # Silicon Integrated Systems SiS190/191 |
239 |
#device sis # Silicon Integrated Systems SiS 900/SiS 7016 |
240 |
#device sk # SysKonnect SK-984x & SK-982x gigabit Ethernet |
241 |
#device ste # Sundance ST201 (D-Link DFE-550TX) |
242 |
#device stge # Sundance/Tamarack TC9021 gigabit Ethernet |
243 |
#device tl # Texas Instruments ThunderLAN |
244 |
#device tx # SMC EtherPower II (83c170 ``EPIC'') |
245 |
#device vge # VIA VT612x gigabit Ethernet |
246 |
device vr # VIA Rhine, Rhine II |
247 |
#device wb # Winbond W89C840F |
248 |
#device xl # 3Com 3c90x (``Boomerang'', ``Cyclone'') |
249 |
|
250 |
# ISA Ethernet NICs. pccard NICs included. |
251 |
#device cs # Crystal Semiconductor CS89x0 NIC |
252 |
# 'device ed' requires 'device miibus' |
253 |
#device ed # NE[12]000, SMC Ultra, 3c503, DS8390 cards |
254 |
#device ex # Intel EtherExpress Pro/10 and Pro/10+ |
255 |
#device ep # Etherlink III based cards |
256 |
#device fe # Fujitsu MB8696x based cards |
257 |
#device ie # EtherExpress 8/16, 3C507, StarLAN 10 etc. |
258 |
#device sn # SMC's 9000 series of Ethernet chips |
259 |
#device xe # Xircom pccard Ethernet |
260 |
|
261 |
# Wireless NIC cards |
262 |
#device wlan # 802.11 support |
263 |
#options IEEE80211_DEBUG # enable debug msgs |
264 |
#options IEEE80211_AMPDU_AGE # age frames in AMPDU reorder q's |
265 |
#options IEEE80211_SUPPORT_MESH # enable 802.11s draft support |
266 |
#device wlan_wep # 802.11 WEP support |
267 |
#device wlan_ccmp # 802.11 CCMP support |
268 |
#device wlan_tkip # 802.11 TKIP support |
269 |
#device wlan_amrr # AMRR transmit rate control algorithm |
270 |
#device an # Aironet 4500/4800 802.11 wireless NICs. |
271 |
#device ath # Atheros pci/cardbus NIC's |
272 |
#device ath_hal # pci/cardbus chip support |
273 |
#options AH_SUPPORT_AR5416 # enable AR5416 tx/rx descriptors |
274 |
#device ath_rate_sample # SampleRate tx rate control for ath |
275 |
#device ral # Ralink Technology RT2500 wireless NICs. |
276 |
#device wi # WaveLAN/Intersil/Symbol 802.11 wireless NICs. |
277 |
#device wl # Older non 802.11 Wavelan wireless NIC. |
278 |
|
279 |
# Pseudo devices. |
280 |
device loop # Network loopback |
281 |
device random # Entropy device |
282 |
device ether # Ethernet support |
283 |
device vlan # 802.1Q VLAN support |
284 |
device tun # Packet tunnel. |
285 |
device pty # BSD-style compatibility pseudo ttys |
286 |
device md # Memory "disks" |
287 |
device gif # IPv6 and IPv4 tunneling |
288 |
device faith # IPv6-to-IPv4 relaying (translation) |
289 |
device firmware # firmware assist module |
290 |
|
291 |
# The `bpf' device enables the Berkeley Packet Filter. |
292 |
# Be aware of the administrative consequences of enabling this! |
293 |
# Note that 'bpf' is required for DHCP. |
294 |
device bpf # Berkeley packet filter |
295 |
|
296 |
# USB support |
297 |
options USB_DEBUG # enable debug msgs |
298 |
#device uhci # UHCI PCI->USB interface |
299 |
device ohci # OHCI PCI->USB interface |
300 |
device ehci # EHCI PCI->USB interface (USB 2.0) |
301 |
device usb # USB Bus (required) |
302 |
#device udbp # USB Double Bulk Pipe devices |
303 |
#device uhid # "Human Interface Devices" |
304 |
#device ukbd # Keyboard |
305 |
#device ulpt # Printer |
306 |
device umass # Disks/Mass storage - Requires scbus and da |
307 |
#device ums # Mouse |
308 |
#device urio # Diamond Rio 500 MP3 player |
309 |
# USB Serial devices |
310 |
#device u3g # USB-based 3G modems (Option, Huawei, Sierra) |
311 |
#device uark # Technologies ARK3116 based serial adapters |
312 |
#device ubsa # Belkin F5U103 and compatible serial adapters |
313 |
#device uftdi # For FTDI usb serial adapters |
314 |
#device uipaq # Some WinCE based devices |
315 |
#device uplcom # Prolific PL-2303 serial adapters |
316 |
#device uslcom # SI Labs CP2101/CP2102 serial adapters |
317 |
#device uvisor # Visor and Palm devices |
318 |
#device uvscom # USB serial support for DDI pocket's PHS |
319 |
# USB Ethernet, requires miibus |
320 |
#device aue # ADMtek USB Ethernet |
321 |
#device axe # ASIX Electronics USB Ethernet |
322 |
#device cdce # Generic USB over Ethernet |
323 |
#device cue # CATC USB Ethernet |
324 |
#device kue # Kawasaki LSI USB Ethernet |
325 |
#device rue # RealTek RTL8150 USB Ethernet |
326 |
#device udav # Davicom DM9601E USB |
327 |
# USB Wireless |
328 |
#device rum # Ralink Technology RT2501USB wireless NICs |
329 |
#device uath # Atheros AR5523 wireless NICs |
330 |
#device ural # Ralink Technology RT2500USB wireless NICs |
331 |
#device zyd # ZyDAS zb1211/zb1211b wireless NICs |
332 |
|
333 |
# FireWire support |
334 |
#device firewire # FireWire bus code |
335 |
#device sbp # SCSI over FireWire (Requires scbus and da) |
336 |
#device fwe # Ethernet over FireWire (non-standard!) |
337 |
#device fwip # IP over FireWire (RFC 2734,3146) |
338 |
#device dcons # Dumb console driver |
339 |
#device dcons_crom # Configuration ROM for dcons |
340 |
|
341 |
# IPSec - 2008-04-30 Douglas Thrift |
342 |
device crypto # core crypto support |
343 |
device cryptodev # /dev/crypto for access to h/w |
344 |
|
345 |
options IPSEC #IP security |
346 |
|
347 |
# Soekris - 2008-01-06 Douglas Thrift |
348 |
options CPU_GEODE |
349 |
options CPU_SOEKRIS |
350 |
|
351 |
# vim: tabstop=8 shiftwidth=8 |